Home | Search | Emissions | Pollutants | About the Database |
LDEQ Accident Number Accident Date |
Point Source(s) | Notes | Amount of Release |
107460 2008-07-23 | Weld in the Isostripper Side Cut Receiver overhead line of the Alkylation Unit | Cause: malfunction of a weld (0.1 inch diameter hole) in the Isostripper Side Cut Receiver overhead line of the Alkylation Unit. Followup: No Information Provided Notes: This was a report from Murphy to LDEQ and according to Murphy no reportable quantities were exceeded. MOUSA applied water to the line as a precaution, and shut down the unit to repair the line. | 149.0 pounds |
152726 2013-12-05 | South flare | Cause: Startup of the alky unit and depropanizer were the source of increase flaring. Propane and butane were being flared during the startup. Followup: No Notes: The event will be reported in the semi-annual Title V deviation report. Reportable quantities were not exceeded during the start up. Note: A citizen complain initiated this incident report. The caller reported large flaring, noise, and vibrations at her home. |
Connect With Us: